Installation Instructions

Install instructions for gutter guards and downpipes

EasyAc® Installation Instructions For Gutter Guards.

Using a marker, trace a rectangle on your gutter guard where you want the EasyAc® installed for easy access.

Using a pair of tin snips, cut the mesh on the rectangle you traced being careful not to cut outside of the template lines.

Place the BASE PLATE over the hole. Bend each tab underneath the mesh until the base plate and surface are pressed tightly together.

Align the LID next to the 6 slots (ensure the lip faces upwards) and slide to one side until the lid latches into place with a satisfying snap!

(Click Images To Enlarge)

Watch The Installation Video!

EasyAc® Installation Instructions For Downpipes.

Using a felt marker, trace a rectangle on your down pipe where you want the EasyAc® installed for easy access.

Using a pair of tin snips, cut the pipe on the rectangle you traced being careful not to cut outside of the template lines.

Place the BASE PLATE over the hole. Bend each tab underneath the pipe until the tabs are pressed tightly against the downpipe.

Align the LID next to the 6 slots (ensure the lip faces upwards) and slide to one side until the lid latches into place with a satisfying snap!

(Click Images To Enlarge)

Watch The Installation Video!

15 Binney Road
Kings Park, NSW, 2148, Australia